Radio Control Systems – 400i Series

Models (5 available)

  • Solo 400i
    • 6 single-speed buttons +AUX + EMS Stop
  • Solo 410-V5
    • 2 dual-speed buttons + 4 single-speed buttons + AUX + EMS
  • Solo 420i
    • 6 dual-speed buttons (3 wire cumulative) + AUX + EMS + 2 Seperate Common Circuits (Typical)
  • Solo 430i
    • 6 dual-speed buttons + SELECT button for dual hoist and trolley + EMS
  • Solo 430A-V5
    • 6 dual-speed buttons + 3rd Speed/ AUX button + EMS

Specifications

Transmitter

Solo 400i Series Radio Control System Insides

Frequency Range
301 MHz
Channel Spacing
25 KHz
Transmitting Range
Internal Antenna @ 200 feet
External Antenna @ 300 Feet
Hamming Distance
6
Frequency Control
Quartz Crystals
Transmitting Power
~0.3 mW
Enclosure Rating
IP-66 (Waterproof)
Sorce Voltage
4.5V (“AA” x 3)
Current Drain
10 ~ 18mA
Operating Temp.
-13æ F ~ 158æ F
Dimension
10.7 x 2.48 x 1.85 (inch)
Weight
15.5 oz (with batteries)

Receiver

Modulation
Narrow Band FM
Decoding Reference
Quartz Crystals
Frequency Control
Synthesizer (PLL)
Sensitivity
-120 dBm
Responding Time
40 mS
Output Contact
250V @ 10A
Enclosure Rating
IP-65
Sorce Voltage
110 ~ 120 VAC @ 60Hz
Power Consumption
11 VA
Operating Temp.
-13æ F ~ 158æ F
Dimension
12.2 x 5.3 x 2.8 (inch)
Weight
4.0 lb ( with output cable)

Features

200 Hour Battery LifeSolo 400i Series Radio Control System

Efficient power saving circuit requires only three “AA” type alkaline batteries. The battery life is good for more than 200 hours of continuous operation between battery replacements, which ensures higher productivity in the workplace by minimizing frequent replacement or recharging of batteries.

32,769 Unique ID Codes

The encoder/decoder system utilizes advanced microprocessor control. The availability of 32,768 sets of unique ID codes will ensure that only commands from the matching control transmitter can be carried out without any interference from other radio systems.

Total Solution

Prewired receiver with 6 foot multi-conductor cable, numbered wires with terminals, cable grip and detailed schematic on the receiver face. Our total solution reduces the installation time, no other pre-assembly or purchases are required.

Service Disabled Veteran Owned Small Business (SDVOSB)

CVE Certified

  • J & J Rail Sales, Inc.
  • 3575 Stern Avenue, Suite 200
  • St. Charles, IL 60174
  • 800-677-5180 (Phone)
  • 708-552-4187 (Fax)

RailSales@jjrailsales.com | http://www.jjrailsales.com | Copyright 1990 - 2017, J & J Rail Sales, Inc. | Site design by John P. Neumann